Reduced riparian zone width compromises aquatic macroinvertebrate communities in streams of southern Brazil

Recent changes in Brazilian legislation reduced the width of riparian forest buffer needed to be preserved in private properties from 30 to 15 m or less. The consequences of these modifications can be dramatic, mainly because riparian buffer width is an important parameter for riparian forest structure and functioning. Our study assessed whether (1) macroinvertebrate family richness and Ephemeroptera, Plecoptera, and Trichoptera (EPT) family richness decrease with reduced riparian buffer width; (2) taxonomic composition and functional feeding group (FFG) composition of macroinvertebrates vary with a reduced riparian buffer width; and (3) reduced riparian buffer width similarly influence the macroinvertebrate community in different stream substrates. We selected three fragments with different riparian buffer widths (>40, <30, and <15 m) in three streams (fourth and fifth orders) in the Sinos River watershed, southern Brazil. Our results show that on all substrate types, reducing the width of the riparian buffer altered neither the macroinvertebrate richness nor EPT richness. However, EPT richness was greater in the substrates stone and gravel than leaf litter, independent of riparian buffer width. There was a significant difference in macroinvertebrate composition among riparian buffer widths. The macroinvertebrate composition and FFG differed among substrates, independent of riparian buffer width. This study showed that riparian buffer widths <15 m altered the macroinvertebrate community. A width greater than 15 m is necessary to maintain the composition and trophic conditions of macroinvertebrate families similar to those found in reference states of conservation.     

Variations in the Epiphytic Invertebrate Community Structure on Potamogeton Perfoliatus L. in Traunsee (Austria): Patchiness versus Impacts by Industrial Tailings

The epiphytic invertebrates found on Potamogetonperfoliatus L. in Traunsee, an oligotrophic Alpine lake inAustria, were investigated in August and October 1998 in orderto study the impact of industrial tailings discharged into thelake. 113 taxa were found, 54 could be identified to thespecies level. Their total abundance varied between ca.190,000 and 1,138,000 ind. m^-2 lake bottom area. Thisepiphytic assemblage was dominated by Dreissenapolymorpha and Sida crystallina, which resulted in avery low overall species diversity. Multivariate statisticalanalyses revealed significant differences in the communitystructure between three sites, each of them was located at adifferent distance from the site of industrial waste emission.These differences were interpreted as variations which reflectthe patchiness within highly structured habitats rather thanas being the result of the industrial pollution.     

Oxy-fuel coal combustion—A review of the current state-of-the-art

Carbon dioxide emissions will continue being a major environmental concern due to the fact that coal will remain a major fossil-fuel energy resource for the next few decades. To meet future targets for the reduction of greenhouse gas (GHG) emissions, capture and storage of CO₂ is required. Carbon capture and storage technologies that are currently the focus of research centres and industry include: pre-combustion capture, post-combustion capture, and oxy-fuel combustion. This review deals with the oxy-fuel coal combustion process, primarily focusing on pulverised coal (PC) combustion, and its related research and development topics. In addition, research results related to oxy-fuel combustion in a circulating fluidised bed (CFB) will be briefly dealt with.During oxy-fuel combustion, a combination of oxygen, with a purity of more than 95 vol.%, and recycled flue gas (RFG) referred to as oxidant is used for combusting the fuel producing a gas consisting of mainly CO₂ and water vapour, which after purification and compression, is ready for storage. The high oxygen demand is supplied by a cryogenic air separation process, which is the only commercially available mature technology. The separation of oxygen from air as well as the purification and liquefaction of the CO₂-enriched flue gas consumes significant auxiliary power. Therefore, the overall net efficiency is expected to be decreased by 8–12% points, corresponding to a 21–35% increase in fuel consumption. Alternatively, ion transport membranes (ITMs) are proposed for oxygen separation, which might be more energy efficient. However, since ITMs are far away from becoming a mature technology, it is widely expected that cryogenic air separation will be the selected technology in the near future. Oxygen combustion is associated with higher temperatures compared with conventional air combustion. Both fuel properties as well as limitations of steam and metal temperatures of the various heat exchanger sections of the boiler require a moderation of the temperatures in the combustion zone and in the heat-transfer sections. This moderation in temperature is accomplished by means of recycled flue gas. The interdependencies between the fuel properties, the amount and temperature of the recycled flue gas, and the resulting oxygen concentration in the combustion atmosphere are reviewed.The different gas atmosphere resulting from oxy-fuel combustion gives rise to various questions related to firing, in particular, with respect to the combustion mechanism, pollutant reduction, the risk of corrosion, and the properties of the fly ash or its resulting deposits. In this review, detailed nitrogen and sulphur chemistry was investigated in a laboratory-scale facility under oxy-fuel combustion conditions. Oxidant staging succeeded in reducing NO formation with effectiveness comparable to that typically observed in conventional air combustion. With regard to sulphur, a considerable increase in the SO₂ concentration was measured, as expected. However, the H₂S concentration in the combustion atmosphere in the near-flame zone increased as well. Further results were obtained in a pilot-scale test facility, whereby acid dew points were measured and deposition probes were exposed to the combustion environment. Slagging, fouling and corrosion issues have so far been addressed via short-term exposure and require further investigation.Modelling of PC combustion processes by computational fluid dynamics (CFD) has become state-of-the-art for conventional air combustion. Nevertheless, the application of these models for oxy-fuel combustion conditions needs adaptation since the combustion chemistry and radiative heat transfer is altered due to the different combustion gas atmosphere.CFB technology can be considered mature for conventional air combustion. In addition to its inherent advantages like good environmental performance and fuel flexibility, it offers the possibility of additional heat exchanger arrangements in the solid recirculation system, i.e. the ability to control combustion temperatures despite relatively low flue gas recycle ratios even when combusting in the presence of high oxygen concentrations.     

U.S. Environmental Protection Agency’s Super-fund Innovative Technology Evaluation of Pneumatic Fracturing ExtractionSM

The U.S. Environmental Protection Agency (EPA), in cooperation with Accutech Remedial Systems (ARS) and the New Jersey Institute of Technology (NJIT), performed a field demonstration of Pneumatic Fracturing Extraction (PFE)^SM for the removal of chlorinated-volatile organic compounds (VOCs) from vadose zones of low permeability. The demonstration was conducted in the fall of 1992 at an industrial park in Somerville, New Jersey, where removal of VOC contamination in shale bedrock was required to comply with New Jersey’s Environmental Cleanup Responsibility Act (ECRA). During the demonstration, airflow and contaminant concentrations were monitored to establish a database against which the developer’s claims about the technology were evaluated. The developer contended that PFE would increase extracted airfkiw rates from the subsurface formation by at least 100 percent and would increase the mass removal rate for the key contaminant, trichloroethene (TCE), by at least 50 percent. Also, during the demonstration hot-gas injection was evaluated. Based on comparisons of four-hour test results before and after fracturing, airflow rates increased more than 600 percent, and TCE mass-removal rates increased about 675 percent. The increase in TCE mass-removal rates appeared to be a result, primarily, of the increased airflow. In addition, the extracted air contained significantly higher concentrations of other VOCs after fracturing. Using data developed in the four-hour postfracture test, the estimated cost for a hypothetical one-year clean-up is $140 per pound of TCE removed, or $140 per ton of soil contaminated with one pound of TCE. Experiments to evaluate the effects of injecting heated air, at 200 to 250°F, into the vadose zone gave inconclusive results.     

Environmental Indicators to Assess the Risk of Diffuse Nitrogen Losses from Agriculture

Diffuse Nitrogen (N) loss from agriculture is a major factor contributing to increased concentrations of nitrate in surface and groundwater, and of N₂O and NH₃ in the atmosphere. Different approaches to assess diffuse N losses from agriculture have been proposed, among other direct measurements of N loads in leachate and groundwater, and physically-based modelling. However, both these approaches have serious drawbacks and are awkward to use at a routine base. N loss indicators (NLIs) are environmental management tools for assessing the risk of diffuse N losses from agricultural fields. They range in complexity from simple proxy variables to elaborate systems of algebraic equations. Here we present an overview of NLIs developed in different parts of the world. NLIs can be categorized into source-based, transport-based, and composite approaches. Several issues demand more attention in future studies. (1) Is incorporation of leaching losses and gaseous losses into one single NLI warranted? (2) Is it sufficient to restrict the focus on the rooted soil zone without considering the vadose zone and aquifer? (3) Calibration and validation of NLIs using field data of N loss seems not sufficient. Comparisons of several different NLIs with each other needs more attention; however, the different scaling of NLIs impedes comparability. (4) Sensitivity of input parameters with regard to the final NLI output needs more attention in future studies. (5) For environmental management purposes, factors addressing management decision by farmers deserve more attention.     

Assessment of the predictive quality of simple indicator approaches for nitrate leaching from agricultural fields

Diffuse N losses from agriculture are a major cause of excessive nitrate concentrations in surface and groundwaters. Leaching through the soil is the main pathway of nitrate loss. For environmental management, an anticipatory assessment and monitoring of nitrate leaching risk by indicator (index) approaches is increasingly being used. Although complex Nitrogen Loss Indicator (NLI) approaches may provide more information, relatively simple NLIs may have advantages in many practical situations, for instance, when data availability is restricted.In this study, we tested four simple NLIs to assess their predictive properties: 1. N balance (Nbal); 2. Exchange frequency of soil solution (EF); 3. Potential nitrate concentration in leachate (PNCL); 4. A composite NLI (balance exchange frequency product, BEP). Field data of nitrate leaching from two sites in northeast Germany along with published data from several sites in Germany, Scotland and the USA were utilized.Nbal proved to be a relatively poor indicator of Nloss for the time frame of one year, whereas its prediction accuracy improved for longterm-averaged data. Correlation between calculated EF and experimental data was high for single-year data, whereas it was lower for longterm-averaged data. PNCL gave no significant correlations with measured data and high deviations. The results for BEP were intermediate between those for Nbal and EF.The results suggest that the use of EF is appropriate for assessing N leaching loss for single-year data and specific sites with comparable N input and management practices, whereas for longterm-averaged data, Nbal is better suited. BEP is an appropriate NLI both for single year and longterm data which accounts for source and transport factors and thus is more flexible than source-based Nbal and transport-based EF. However, such simplified NLIs have limitations: 1. The N cycle is not covered completely; 2. Processes in the vadose zone and the aquifer are neglected, 3. Assessment of management factors is restricted.